ensure proper functioning, any other way of assembling the extra attachment is not permissible!
–
The assembled extra attachment can be attached and removed only when the drive unit
is switched off and the power cord is unplugged from the power socket.
– Do not wind the power cord around the appliance; this will extend its life.
– Never immerse the gearbox into water and never wash it in running water!
–
Should excessive vibration occur when using this attachment, either reduce the speed
or stop the machine and remove some of the contents.
–
ATTENTION
: Do not use this processor in series with an external timer, remote controller
or any other device that switches on the appliance automatically, since a fire risk exists
when the processor is accidentally covered or displaced at the moment it switches on.
–
Make sure that the power cord does not come into contact with the rotating part of the appliance.
–
The power cord must not be damaged by sharp or hot objects, by an open flame and
it must not be submerged under water.
–
Never place it on hot surfaces and do not leave it hanging over the edge of a table or
a work bench. If the cord is brushed against or pulled by for example children the appliance
may tip over or be pulled down and lead to serious injuries!
–
If the use of an extension cord is necessary, then it must not be damaged and must meet
the valid norms in force.
–
Only use the appliance with original accessories from the manufacturer.
–
Use this appliance only for the purpose for which it was designed as specified in this user‘s
manual. Never use the appliance for any other purpose.
–
WARNING
: There is a risk of injury in case of incorrect use (not in accordance with
the manual) of the appliance.
– All text in other languages and pictures shown on the packaging, or the product itself,
are translated and explained at the end of this language mutation.
–
The manufacturer takes no responsibility for damages and injuries caused by the incorrect
use of supplementary machines and accessories (e.g.
ruining of foods, injury, cuts
)
and takes no responsibility arising from the warranty on the appliance in the case that the
above safety notices were not followed.
II. PREPARATION AND USE
First remove all packaging materials, take out the food processor and all accessories.
Then remove all adhesive foils, stickers and paper from the food processor and accessories.
Before the first use, wash all parts, which will be in contact with food, in warm water with
a mild detergent, thoroughly rinse in clear water and wipe dry or let dry. Put the assembled
food processor with the selected attachments on a flat, stable, smooth and clean worktop,
out of reach of children and incapacitated people. Provide sufficient free space for ventilation.
The appliance openings allow free airflow for ventilation, and must not be covered or
otherwise blocked. The feet must not be removed. Electric power socket must be easily
accessible to allow easy disconnecting of the food processor in the case of emergency.
III.1. FOOD PROCESSOR (A)
Description
(fig. 1)
A1 – Multifunctional head release button
A4 – Multifunctional head
A2 – Speed regulating knob
A5 – Space for winding the cable
A3 – Bottom mount for adapters
C1
-
C3
A6 – Power cord
B
– Stainless bowl
EN
29 / 49
