07
7-105
Highway Lane Change Assist operating
B0360KO07
M
: Center
Highway Lane Change Assist function
will operate, when you push the turn
signal lever up or down to the
A
or
B
position while the function is in the ready
state (
indicator is green), and all of
the following conditions are satisfied:
ś
The driver has his/her hand on the
steering wheel
ś
There is no collision risk in the
direction of lane change
ś
There is a single dotted lane line in the
direction of lane change
ś
There are no Forward Collision-
Avoidance Assist and Blind Spot
Collision-Avoidance Warning
ś
The vehicle is driven in the middle of
the lane (should not be driving close
to one side of the lane)
ś
The road you are driving on, or the
road you are about to change lane is a
road that the function can operate
Information
ś
Highway Lane Change Assist operates
when the turn signal lever is positioned
at A. If the turn signal lever is released
to the center (1) before stepping on
the lane, Highway Lane Change Assist
cancels. If the turn signal lever is
released to the center (1) after stepping
on the lane, Highway Lane Change
Assist changes the lane and turns off
the turn signal after lane change is
complete.
ś
When the turn signal lever is placed at
B position for a certain period of time,
the green arrow will appear. At this
time, even when the lever is released
and returns to it’s original position (1),
lane change will still be assisted.
ś
While lane change is being made by the
function, the turn signal indicator will
blink even when the turn signal lever is
not held, and the turn signal indicator
will turn off when lane change is
complete.
ś
Highway lane change assist does not
operate on the entrance or exit of the
highway.
B0360KO08
B0360KO09
