07
7-103
Information
ś
Driving Speed Limit helps you drive
below 40 mph (60 km/h). At this time,
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.
ś
Driving Speed Limit will cancel in the
following circumstances:
-
When the driver grabs the steering
wheel again
-
When the driver turns on Lane
Following Assist by pressing the Lane
Driving Assist button
-
When +, -,
switch or button is
operated,, or the accelerator pedal or
the brake pedal is depressed
Highway Lane Change Assist (if
equipped)
Displaying operating status
You can see the status of the Highway
Lane Change Assist function operation in
the Driving Assist view on the cluster. Refer
to “View Modes” section in chapter 4.
Highway Lane Change Assist function
will be displayed as below depending on
the status of the function.
B360EU04
A : Ready/Operating, B : Standby/Canceled
(1) Highway Lane Change Assist
indicator
ś
Green
on : Ready state
ś
Green
blink : Operating state
ś
Grey
on : Standby state
ś
White
blink : Canceled state
(2) Green lane line
The lane line is displayed same as the
Highway Lane Change Assist indicator
(1). However, if the function is on
standby, it displays whether the lane
line is detected.
(3) Green arrow and shade
The green arrow is displayed when a
certain amount of time has passed
after the function has started
operating, and until the lane change
has completed.
