Hyundai N800 Series, Installation Manual

Page: 17 / 102

2. RECEIVING THE DELIVERY
2.4.6 FRAME MR9
Table 10: The content of the accessories bag, MR9
2.5 "PRODUCT MODIFIED" LABEL
In the accessories bag, there is also a "product modified" label. The function of the label is to tell the service personnel about
the changes that are made in the AC drive. Attach the label on the side of the AC drive to know where to find it. If you make
changes in the AC drive, write the change on the label.
2.6 DISPOSAL
11
Item
M4x16 screw
Control cable grounding lamella
Cable lugs KP40
Cable insulator
Cable grommet, hole diameter 25.3 mm
IP00: Touch shield
IP00: M4x8 screw
Quantity
3
3
5
10
4
1
2
Purpose
Screws for the control cable clamps
Control cable grounding
Clamping power cables
To prevent contact between cables
Sealing for the cables
To prevent contact with live parts
To attach the touch protection shield
When the drive is at the end of its operation life, do not discard it as a part of municipal waste. You can recycle the primary
components of the drive. You must disassemble some components before you can remove the different materials. Recycle
the electrical and electronic components as waste. To make sure that the waste is recycled correctly, send the waste to a re-
cycling centre. You can also send the waste back to the manufacturer. Obey the local and other applicable regulations.
N800A