2. RECEIVING THE DELIVERY
2.4.4 FRAME MR7
Table 8: The content of the accessories bag, MR7
2.4.5 FRAME MR8
Table 9: The content of accessories bag, MR8
10
Item
M6x30 slotted nut
M4x16 screw
M6x12 screw
Control cable grounding lamella
EMC cable clamps, size M25
Grounding clamp
“Product modified” label
IP21: Cable grommet
IP54: Cable grommet
Quantity
6
3
1
3
3
2
1
3
3
Purpose
Nuts for the power cable clamps
Screws for the control cable clamps
Screw for the external grounding of the drive
Control cable grounding
Clamping the power cables
Power cable grounding
Data about changes
Sealing for the cables
Sealing for the cables
Item
M4x16 screw
Control cable grounding lamella
Cable lugs KP40
Cable insulator
Cable grommet, hole diameter 25.3 mm
IP00: Touch shield
IP00: M4x8 screw
Quantity
3
3
3
11
4
1
2
Purpose
Screws for the control cable clamps
Control cable grounding
Clamping power cables
To prevent contact between cables
Sealing for the cables
To prevent contact with live parts
To attach the touch protection shield
N800A
Summary of Contents for N800 Series
