15
Start-up screen
The unit starts when the ignition switch
is placed in the ACC or ON position.
- Then the radio mode is displayed
on the screen.
Note
• The unit memorizes the last mode
that is played lastly. The last mode
is saved in the memory even if the
ignition switch is placed in the OFF
position. When the ignition switch is
placed in the ACC or ON position,
the mode is automatically recalled.
• It may take long time (about 20 sec-
onds) for the unit to be rebooted.
Turning the unit on
Press POWER
on the control panel in
power off status.
Note
When you insert the disc in the disc
slot, the unit is turned on automatically.
Turning the unit off
Press POWER
on the control panel in
power on status.
Inserting a disc
Insert a disc in the disc slot and play-
back starts automatically.
Adjusting the volume
Rotate the volume knob (VOLUME) on
the control panel.
Note
When you turn the unit off, the current
volume level is automatically memo-
rized. Whenever you turn the unit back
on, it operates at the memorized
volume level.
If you turn the unit off/on below volume
level 5, the volume level is changed
into 5. If you turn the unit off/on above
volume level 20, the volume level is
changed into 20.
Ejecting a disc
Press
Z
on the control panel.
The disc is ejected from the loading
slot.
Note
If the ejected disc is not removed in
approximately 10 seconds, the disc is
automatically inserted again into the
loading slot.
Displaying the clock
Press [CLOCK]
on the control panel in
power on status.
Press [CLOCK]
on the control panel in
power off status.
Note
When the satellite signal is not received,
the “Synchronizing GPS time. Please
wait!” pop-up appears on the screen.
When the satellite signal is received, the
GPS time is displayed on the screen. To
receive the satellite signal, move to an
area free from tall obstructions.
Basic operation
Basic operation
