Emergency situations
8-18
Changing tires
WARNING
A vehicle can slip or roll off of a jack
causing serious injury or death to you or
those nearby. Take the following safety
precautions:
•
Do not get under a vehicle that is
supported by a jack.
•
NEVER attempt to change a tire in
the lane of traffic. ALWAYS move the
vehicle completely off the road on
level, firm ground away from traffic
before trying to change a tire. If you
cannot find a level, firm place off
the road, call a towing service for
assistance.
•
Be sure to use the jack provided with
the vehicle.
•
ALWAYS place the jack on the
designated jacking positions on the
vehicle and NEVER on the bumpers
or any other part of the vehicle for
jacking support.
•
Do not start or run the engine while
the vehicle is on the jack.
•
Do not allow anyone to remain in the
vehicle while it is on the jack.
•
Keep children away from the road
and the vehicle.
Follow these steps to change your
vehicle’s tire:
1. Park on a level, firm surface.
2. Move the shift lever into P (Park, for
dual clutch transmission vehicle)
or neutral (for manual transmission
vehicle), apply the parking brake, and
place the ignition switch in the LOCK/
OFF position.
3. Press the hazard warning flasher
button.
4. Remove the wheel lug nut wrench,
jack, jack handle, and spare tire from
the vehicle.
OOS080007L
OOS080007L
[A] : Block
5. Block both the front and rear of the
tire diagonally opposite of the tire you
are changing.
OOS067017
OOS067017
6. Loosen the wheel lug nuts
counterclockwise one turn each in
the order shown above, but do not
remove any lug nuts until the tire has
een raised off of the ground.
008_OS ENG.indd 8-18
2021-01-05 10:32:26
Summary of Contents for KONA 2021
