Genuine Accessories
Glasses
Gloves
Mask
Hearing Protection
Part Weight (Gross)
FMVSS 110 Compliance Information
1) Read the entire Installation Instructions prior to beginning the installation of this accessory.
2) Make sure the vehicle is completely clean and dry in the area(s) the part is to be installed.
3) Ensure the vehicle is properly protected in the area(s) that the accessory is to be installed.
4) NEVER place tools on painted surfaces, seating surfaces, dash pad, console or floor carpet/mats.
5) Always wear appropriate personal protective equipment, including gloves, safety glasses, etc, when required.
No.
1
2
*Please Note: Item 2 is not included in PIO kit
Application Notes
Denotes quality processes to be checked
prior to moving to the next step
Basic Required Tools
This product is intended for use on carpeted surfaces only, view application chart on Page 3
N
O
T
E
Denotes important information to be
reviewed during the step
Denotes specific tools that are necessary
to complete a step
Denotes personal protective equipment (PPEs) that
may be required for a step. Examples of safety
equipment icons noted below:
Denotes warnings that may lead to serious
physical injury or vehicle damage
Denotes cautions to be taken to avoid
vehicle and component damage
(C) Master Technician or Specialist
(B) Dealer Technician
Instructional Symbols / Definitions
Cargo Blocks
Description
Kit Overview
1
Quick Reference Guide*
Language
English
2/7/2019
Cargo Blocks
(A) Customer
Rev. Date
Difficulty:
Model Year
Copy OEM Logo Here (
→
)
MULTIPLE
J9F18 AU000 (DIO)
Note:
Vehicle Model:
J9F18 AU600 (PIO)
Accessory:
Part No.
MULTIPLE
Difficulty stated above reflects the minimum level of
expertise required to install the accessory:
( A )
Denotes cautions to be taken to avoid
physical injury or electronic component
damage
NONE
lbs
0.40
0.18
Qty
4
All dealers must determine if the Net weight they have added in the form of all options or accessories, when added to the weight of all Port/Dealer Installed
options or accessories, exceeds the lesser of 1.5% of GVWR or 100 lbs. If the additional weight does exceed the lesser of the indicated thresholds, a “Load
Carrying Capacity Reduced” label must be installed. A black, fine-point, indelible marker must be used to write by hand onto the label, the reduced carrying
capacity in kilograms or pounds, which is the total weight of all added options and accessories.
Load Label Part Number: NP070 - 09003
kg
Notes to the Installer:
1
2
ISHY025
Revision Date
02/07/2019
Page 1 of 3
