background image

Genuine Accessories

Glasses

Gloves

Mask

Hearing Protection

Part Weight (Gross)

FMVSS 110 Compliance Information

1) Read the entire Installation Instructions prior to beginning the installation of the part.
2)

3) Make sure the vehicle is completely clean and dry in the area(s) the part is to be installed.
4) Ensure the vehicle is properly protected in the area(s) that the accessory is to be installed.
5) NEVER place tools on painted surfaces, seating surfaces, dash pad, console or floor carpet/mats.
6) Always wear appropriate personal protective equipment, including gloves, safety glasses, etc., when required.

No.

1
2

0.70

lbs

All dealers must determine if the Net weight they have added in the form of  all options or accessories, when added to the weight of all Port/Dealer Installed 
options or accessories, exceeds the lesser of 1.5% of GVWR or 100 lbs.  If the additional weight does exceed the lesser of the indicated thresholds, a “Load 
Carrying Capacity Reduced” label must be installed.  A black, fine-point, indelible marker must be used to write by hand onto the label, the reduced carrying 
capacity in kilograms or pounds, which is the total weight of all added options and accessories.     

Load Label Part Number:  NP070 - 09003

0.32

kg

2

2 Self-Adhesive Loop-End Fastener Strips

Basic Required Tools

Instructional Symbols / Definitions

Denotes quality processes to be checked 
prior to moving to the next step

Denotes personal protective equipment (PPEs) that 

may be required for a step.  Examples of safety 

equipment icons noted below:

If applicable, scan the barcode label located on the accessory part or packaging prior to installing, to register the part. If this accessory is installed as a 
replacement, register the removal of the old part before registering the new part. Old and new parts will have different barcode data, and the old 
registration cannot be reused.

Language

English
4/2/2020

Rev. Date

Difficulty stated above reflects the minimum level of 
expertise required to install the accessory:

( A )

First Aid Kit

Part No.

Model Year

J0F73 AU000

Note:

Denotes cautions to be taken to avoid 
physical injury or electronic component 
damage

Denotes warnings that may lead to serious 
physical injury or vehicle damage

Multiple

Accessory:

Multiple

Vehicle Model:

Difficulty:

(C) Master Technician or Specialist

(B) Dealer Technician

Denotes specific tools that are necessary 
to complete a step

Denotes cautions to be taken to avoid 
vehicle and component damage

Qty

1

Hyundai First Aid Kit

Description

N
O

T
E

Denotes important information to be 
reviewed during the step

None

Notes to the installer:

Kit Overview

(A) Customer     

1

2

(2)

  

Self

adhesive

 

Loop

end

 

Fastener

 

 150580B

Revision Date

4/02/2020

Page 1 of 2

Reviews: