Hyundai HST4020, Instructions Manual

Page: 10 / 17

0083 8
Please note that our equipment has not been de
‐
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
6.
Technical data
Engine type 1 cylinder,
4
‐
stroke
Engine oil(L) 0.6
Displacement(cm3) 212 Blades(number) 18
Engine Power(kW) 4.3 Blade diameter(mm) 166
Engine rated
speed(rpm/min) 3600 Depth setting(mm)
‐
15
‐
+5
Working speed(rpm/min) 2800 Working width(mm) 400
Fuel type Unleaded petrol Tank capacity(L) 3.6
LpA sound pressure level
dB(A) 75 Weight(kg) 34±5
LwA sound power level
dB(A) 95 Vibration at left
m/s
2
20
Measured uncertainty k
dB(A) 2 Vibration at right
m/s
2
23
Guarantee LwA
dB(A) 98 Uncertainty k
m/s
2
0.5
7.
Before starting the equipment
The equipment is delivered unassembled. The grass basket and the complete push bar must be
assembled and mounted before using the equipment. Follow the operating instructions step
‐
by
‐
step
and use the pictures provided as a visual guide to easily assemble the equipment.
Fitting the top push bar holder (Fig. 4a)
Position the upper push bar (Fig. 4a / Item 2) such that its holes line up with the holes of the lower bar.
Screw the tubes together, using the screws (Fig. 4a / Item 12) and nuts (Fig. 4a / Item 8) sup
‐
plied. Use
the supplied cable clips (Fig. 4b / Item 11) to secure the throttle cable and the engine Start / Stop
cable to the lower push bar.
Fitting the debris box (Fig. 5)
Lift the ejector flap (Fig. 5 / Item 5) with one hand and attach the debris box (Fig. 5/Item 6) to the handle
from above using your other hand.
Important: Before you attach the debris box you must ensure that the engine is switched o
ff
and the
roller is not rotating.