1. QUICK COUPLER
1) FIXING BUCKET WITH QUICK COUPLER
(1)
a
Release the lock pins by pressing the
quick coupler switch on monitor. Buzzer
sounds and the red pilot lamp is turned
ON.
b
Tilt quick coupler forward and align the up-
per attaching points of the quick coupler
with upper attaching points on the bucket.
Raise the boom until the bucket rests in
the quick coupler and tilt the quick coupler
rearward until the bucket is level.
c
Lock the bucket with the switch on moni-
tor.
The quick coupler pins move in the engag-
ed position and buzzer sounds.
The green pilot lamp is turned ON.
Check for engagement as follows.
a
Put down pressure on the attachment.
b
Back up the machine and make sure that
there is no movement between the quick
coupler and attachment.
Check that the indicator is in the lock
position.
Always check that the attachment is
properly secured to the quick coupler
by pressing the front part of the attach-
ment against the ground.
Never use an attachment before you
have checked its mounting.
If you are uncertain if the attachment is
securely locked, you must visually
check that the lock pins of the quick
coupler are in the lock position.
Quick coupler switch
Quick coupler
Bucket
Boom
Lock position
Unlock position
Indicator
OTHERS
8-1
Summary of Contents for HL930A
