6) JOYSTICK STEERING CONTROL LEVER (option)
(1) The system has the following functions concentrated in a collapsi-
ble armrest: steering, forward / reverse selection and kick-down
function.
(2) This means that during normal loading work, the operator does not
need to touch the steering wheel.
(3) The joystick steering pilot lamp on the cluster will be ON when lever
steering is activated.
When operating on a public road, the steering wheel
should always be used and the joystick steering be dis-
connected. Also when operating at high speeds (above
20 km/h) on a work site, always use the steering wheel.
(4) Joystick (A)
a
Joystick steering can be enabled after following conditions have
been satisfied.
- Engine is running.
- Operator is seat on the seat.
- LH armrest is placed to the lowered position.
- Gear selector lever is in neutral.
- RCV is deactivated.
- Joystick (A) is placed in normal position.
- Parking brake is disengaged, but the machine speed is zero.
b
After above conditions are met, press the select button (B).
The joystick steering pilot lamp (
) on the cluster will be ON
and joystick steering can be activated.
c
Steering will remain enabled until machine speed is zero and
one of the following conditions is met.
- LH armrest is raised.
- Parking brake is engaged.
- Gear selector lever is in forward or backward position.
- Operator is not seated on the seat.
- Press the select button (B).
The steering wheel works as usual, even if the joystick
steering is activated.
(5) Forward / reverse selection button
F : Forward drive
N : Neutral
R : Reverse drive
a
To be able to operate the forward / reverse drive, the system must first be activated using select
button (B).
The ordinary gear selector control should be in neutral.
b
When this function is engaged, it is possible to operate the forward -reverse selection. If the or-
dinary gear selector control is activated at the same time as the joystick steering is activated,
the ordinary gear selector control overrides any selection made by the joystick steering.
Seat
LH armrest
Lower
Raise
Select
button
(B)
Kick down
button
Revers(R)
Joystick(A)
Forward(F)
Neutral(N)
STEERING
LH
STEERING
LH
3-61
Summary of Contents for HL930A
