Hyundai CRMD 7750 SU, Instruction Manual, Page: 105 / 136

ENG
ENG - 105
USING ThE TfT MONITOR
Open/Close monitor
Press the [OPEN/CLOSE] key on the front panel or remote control to push the display panel out
or in.
Change the monitor tilt angle
Due to the inherent character of LCD, you will get different vision impression s when you watch
it from different angles. The display angle of this unit can be changed; hence you can select the
best angle where you can get the best vision impression. Press the [TILT] key on the display
panel or the remote control to adjust the tilt angle one step at a time. Press and hold the [TILT]
key on the display panel or the remote control to adjust the tilt angle continuously.
Change aspect ratio
Press the [WIDE] key on the display panel or remote control to adjust the aspect ratio.
Image setting
Enter image setting mode
Press the [PIC] key on the remote control.
Select one item to adjust
Press the [

]/[

] keys on the remote control.
Adjust the value
Press the [

]/[

] keys on the remote control.
Exit image setting mode
To exit image setting mode, repeat the first step or stop operation for some seconds.
Reset the unit
If the unit can not work correctly, you should reset the unit by pressing the [RESET] button on
the front panel.
RADIO MODE
SELECT RADIO AS PLAyING SOURCE
Open the SOURCE MENU and then touch RADIO.
SELECT ONE RADIO BAND
Press the [BAND] key on the display panel or remote control or touch the [BAND] icon
on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.
AUTO TUNING
Press the [

]/[

] key on the display panel or remote control ortouch the [

]/[

] icon on
the user interface to seek a higher/lower station. To stop searching, repeat the operation above
or press other keys having radio functions.
Note:
When a station is received, searching stops and the station is played. If the unit receives a ste -
reo broadcasting, the indicator light of stereo ‚ST‘ on the TFT or LCD display will be lighted.
1)
)
)
)