Hyundai Creta Owner'S Manual Download Page 389

Page: 389 / 512

6-21

do
in

an
emer

genc
y

Jack label

OHYK065011

Example

The actual Jack label in the vehicle may differ from the illustration.
For more detailed specifications, refer to the label attached to the jack.

1. Model Name
2. Maximum allowable load
3. When using the jack, set your

parking brake.

4. When using the jack, stop the

engine.

5. Do not get under a vehicle that is

supported by a jack.

6. The designated locations under

the frame

7. When supporting the vehicle, the

base plate of jack must be vertical
under the lifting point.

8. Shift into Reverse gear on vehicles

with manual transaxle or move the
shift lever to the P position on
vehicles with automatic transaxle.

9. The jack should be used on firm

level ground.

10. Jack manufacture
11. Production date
12. Representative company and

address

Summary of Contents for Creta

































































































































































































































































































































































































































































































































Search results

Summary of Contents for Creta

Reviews:

Related manuals for Creta

Brands by name

Popular brands

Hyundai Creta, Owner'S Manual

Search results

Summary of Contents for Creta

Reviews:

Related manuals for Creta

Brands by name

Popular brands