Hyundai 2016 Accent Owner'S Manual Download Page 391

Page: 391 / 456

7 33

Maintenance

2. Lift up the wiper blade clip. Then pull

down the blade assembly and remove
it.

3. Install the new blade assembly in the

reverse order of removal.

Rear window wiper blade
(if equipped)

1. Raise the wiper arm and pull out the

wiper blade assembly.

2. Install the new blade assembly by

inserting the center part into the slot in
the wiper arm until it clicks into place.

3. Make sure the blade assembly is

installed firmly by trying to pull it slight-
ly.

To prevent damage to the wiper arms or
other components, have an authorized
HYUNDAI dealer replace the wiper
blade.

OYF079061

OYF079062

OHM078062

OHM078063

Summary of Contents for 2016 Accent









































































































































































































































































































































































































































































Search results

Summary of Contents for 2016 Accent

Reviews:

Related manuals for 2016 Accent

Brands by name

Popular brands

Hyundai 2016 Accent, Owner'S Manual

Search results

Summary of Contents for 2016 Accent

Reviews:

Related manuals for 2016 Accent

Brands by name

Popular brands