manualshive.com logo in svg

Hyundai 2006 Tiburon, Owner'S Manual

The Hyundai 2006 Tiburon Owner's Manual is a comprehensive guide that allows you to fully understand and operate your vehicle. Experience the convenience of downloading this manual for free from manualshive.com, providing you with all the necessary instructions and insights to make the most of your Tiburon.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

62

NOTE:

If the fuel-filler lid will not open because ice
has formed around it, tap lightly or push on
the lid to break the ice and release the lid. Do
not pry on the lid. If necessary, spray around
the lid with an approved deicer fluid (do not
use radiator anti-freeze) or move the ve-
hicle to a warm place and allow the ice to
melt.

HGK2018Q

REMOTE FUEL-FILLER LID
RELEASE

B560A03JM-AAT

The fuel-filler lid may be opened from inside the
vehicle by pulling up on the fuel-filler lid opener
located on the front floor area on the left side of
the vehicle.

HGK2017

!

When closing the hood, slowly close the hood
and make sure it locks into place.

WARNING:

o Always double check to be sure that the

hood is firmly latched before driving
away. If it is not latched, the hood could
open while the vehicle is being driven,
causing a total loss of visibility, which
might result in an accident.

o Do not move the vehicle with the hood

in the raised position, as vision is ob-
structed and the hood could fall or be
damaged.

Summary of Contents for 2006 Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for 2006 Tiburon

Uniden BTSC1500 Owner'S Manual preview
BTSC1500
Brand: Uniden Pages: 16
Uniden BTSC1500 User Manual preview
BTSC1500
Brand: Uniden Pages: 20
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Brand: 3SIXT Pages: 12
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Cadillac 2012 Escalade Hybrid Manual preview
2012 Escalade Hybrid
Brand: Cadillac Pages: 90
Camcar 40108 Mounting Instructions preview
40108
Brand: Camcar Pages: 6
ABL eMH3 Quick Start Manual preview
eMH3
Brand: ABL Pages: 4
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Hank HKWP1100-10Q User Quick Manual preview
HKWP1100-10Q
Brand: Hank Pages: 2
Hudson 1933 Eight Owner'S Manual preview
1933 Eight
Brand: Hudson Pages: 34
Omix-Ada 11704.05 Owner'S Manual preview
11704.05
Brand: Omix-Ada Pages: 6
RHOX LGT-381L Installation Instructions Manual preview
LGT-381L
Brand: RHOX Pages: 8
Cadillac 2011 SRX CROSSOVER Owner'S Manual preview
2011 SRX CROSSOVER
Brand: Cadillac Pages: 416
TIE DOWN LONGRUN 86103 Assembly/Installation Instructions preview
LONGRUN 86103
Brand: TIE DOWN Pages: 2
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
Gator GT700SD User Manual preview
GT700SD
Brand: Gator Pages: 6
F.lli Menabo CROSS 2 Assembly Instructions Manual preview
CROSS 2
Brand: F.lli Menabo Pages: 16

Brands by name

Popular brands

Load more brands