manualshive.com logo in svg

Hyundai 2006 Tiburon, Owner'S Manual

The Hyundai 2006 Tiburon Owner's Manual is a comprehensive guide that allows you to fully understand and operate your vehicle. Experience the convenience of downloading this manual for free from manualshive.com, providing you with all the necessary instructions and insights to make the most of your Tiburon.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

91

H240B02A-GAT

1. POWER ON-OFF Control

Knob

The radio unit may be operated when the ignition
key is in the "ACC" or "ON" position.  Press the
knob to switch the power on. The LCD shows
the radio frequency in the radio mode or the tape
direction indicator in the tape mode. To switch
the power off, press the knob again.

VOLUME Control

Rotate the knob clockwise to increase the
volume and turn the knob counterclockwise to
reduce the volume.

2. BASS Control Knob

Press to pop the knob out and turn to the left or
right for the desired bass tone.

BAL (Balance Control) Knob

Pull the bass control knob further out. Turn the
control knob clockwise to emphasize right
speaker sound (left speaker sound will be
attenuated).
When the control knob is turned counterclock-
wise, left speaker sound will be emphasized
(right speaker sound will be attenuated).

3. TREB (Treble Control) Knob

Press to pop the knob out and turn to the left or
right for the desired treble tone.

FAD (Fader Control) Knob

Pull the treble control knob further out.
Turn the control knob counterclockwise to
emphasize front speaker sound (rear speaker
sound will be attenuated).
When the control knob is turned clockwise, rear
speaker sound will be emphasized (front
speaker sound will be attenuated).

4. TUNE (Manual) Select Button

Press the    side or    side to increase or to
decrease the frequency. Press either button
and hold down to continuously scroll. Release
button once the desired station is reached.

SEEK Operation
(Automatic Channel Selection)

Press the TUNE select button 1 sec or
more.Releasing it will automatically tune to the
next available station with a beep sound.
When the    side is pressed longer than 1 second,
releasing will automatically tune to the next
higher frequency and when the   side is pressed
longer than 1 second, releasing will automati-
cally tune to the next lower frequency.

5. BAND Selector

Pressing the               button changes the AM,
FM1 and FM2 bands. The mode selected is
displayed on LCD.

6. PRESET STATION SELECT
Button

Six (6) stations for AM, FM1 and FM2 respec-
tively can be preset in the electronic memory
circuit on this unit.

HOW TO PRESET STATIONS

Six AM and twelve FM stations may be pro-
grammed into the memory of the radio. Then, by
simply pressing the band select button and/or
one of the six station select buttons, you may
recall any of these stations instantly. To pro-
gram the stations, follow these steps:

o Press band selector to set the band for AM,

FM1, or FM2.

o Select the desired station to be stored by

seek or manual tuning.

o Determine the preset station select button

you wish to use to access that station.

FM/AM

Summary of Contents for 2006 Tiburon











































































































































































































































































Reviews:

No comments

Related manuals for 2006 Tiburon

Cadillac SRX 2012 Instructions preview
SRX 2012
Brand: Cadillac Pages: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Brand: Cadillac Pages: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Brand: Cadillac Pages: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Brand: Cadillac Pages: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Brand: Cadillac Pages: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Brand: Cadillac Pages: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Brand: Cadillac Pages: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Brand: Cadillac Pages: 602
Cadillac ESCALADE ESV 2004 Owner'S Manual preview
ESCALADE ESV 2004
Brand: Cadillac Pages: 20
Cadillac ESCALADE EXT 2005 Owner'S Manual preview
ESCALADE EXT 2005
Brand: Cadillac Pages: 460
Cadillac CT6 SUPER CRUISE 2018 Convenience/Personalization Manual preview
CT6 SUPER CRUISE 2018
Brand: Cadillac Pages: 8
Cadillac XT6 2023 Manual preview
XT6 2023
Brand: Cadillac Pages: 20
Cadillac LYRIQ 2023 Owner'S Manual preview
LYRIQ 2023
Brand: Cadillac Pages: 337
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Quadratec QuadraTop Adventure Top S Installation Manual preview
QuadraTop Adventure Top S
Brand: Quadratec Pages: 20
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
Alpine KCE-G7QI Installation preview
KCE-G7QI
Brand: Alpine Pages: 2
Whispbar K896W Fitting Instructions Manual preview
K896W
Brand: Whispbar Pages: 15

Brands by name

Popular brands

Load more brands