manualshive.com logo in svg

Hyundai 2006 Sonata, Owner'S Manual

The Hyundai 2006 Sonata Owner's Manual is an essential guide for owners of this popular sedan model. Obtain the comprehensive manual effortlessly through free downloads at manualshive.com, giving you access to detailed information and instructions on operating your Hyundai Sonata 2006 model.

Share
Download
background image

2

DRIVING YOUR HYUNDAI

22

C190F01Y-GAT

Trailer or Vehicle Towing Tips

1. Before towing, check hitch and safety chain

connections as well as proper operation of
the trailer running lights, brake lights, and
turn signals.

2. Always drive your vehicle at a moderate

speed. (Less than 60 mph)

3. Trailer towing requires more fuel than normal

conditions.

4. To maintain engine braking efficiency and

electrical charging performance, do not tow
a trailer with the transaxle in fifth gear (manual
transaxle).

5. Always secure items in the trailer to prevent

load shift while driving.

6. Check the condition and air pressure of all

tires on the trailer and your car. Low tire
pressure can seriously affect the handling.
Also check the spare tire.

7. The vehicle/trailer combination is more af-

fected by crosswind and buffeting.
When being passed by a large vehicle, keep
a constant speed and steer straight ahead.
If there is too much wind buffeting, slow down
to get out of the other vehicle's air turbulence.

!

lbs(kg)

!

Tongue

200 (90)

-

With

3.3L

Brake

2.4L

Without Brake

Maximum Towable Weight

Trailer

 2000 (900)

1500 (675)

1000 (450)

CAUTION:

The following specifications are recom-
mended when towing a trailer. The loaded
trailer weight cannot safely exceed the val-
ues in the chart below.

WARNING:

o Improperly loading your vehicle and

trailer can seriously affect its steering
and braking performance causing a
crash which could cause serious injury
or death.

o Towing a trailer affects vehicle handling

and braking.

o Drive more slowly when towing a trailer

and allow more distance when braking.

o Be careful when driving in slippery and

windy conditions.

o Be careful when turning and while driv-

ing up and down hills.

3. The front or rear axle weight must not

exceed the Gross Axle Weight Rating
(GAWR) shown on the vehicle identifi-
cation plate (see page 8-2). It is possible
that your towing package does not ex-
ceed the GVWR but exceeds the GAWR.
Improper trailer loading and/or too much
luggage in the trunk can overload the
rear axle. Redistribute the load and check
the axle weight again.

Summary of Contents for 2006 Sonata





















































































































































































































































































Reviews:

No comments

Related manuals for 2006 Sonata

Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Acdeos AXS FL Manual preview
AXS FL
Brand: Acdeos Pages: 38
iDataLink Maestro Installation Manual preview
Maestro
Brand: iDataLink Pages: 9
B-Speech B-Speech Prim Manual preview
B-Speech Prim
Brand: B-Speech Pages: 18
Yakima K618 Instructions Manual preview
K618
Brand: Yakima Pages: 11
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
Allen Sports QR545 Instructions preview
QR545
Brand: Allen Sports Pages: 2
Trailboss QTHD519L Fitting Instructions Manual preview
QTHD519L
Brand: Trailboss Pages: 8
Jaeger J05252127 Fitting Instructions Manual preview
J05252127
Brand: Jaeger Pages: 17
Whelen Engineering Company FastTrax FTF4 Installation Manual preview
FastTrax FTF4
Brand: Whelen Engineering Company Pages: 9
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
U.S. General 96524 Set Up And Operating Instructions Manual preview
96524
Brand: U.S. General Pages: 8
Xhorse VVDI User Manual preview
VVDI
Brand: Xhorse Pages: 48
MAcarbon MAA.R8.06 Install Instructions preview
MAA.R8.06
Brand: MAcarbon Pages: 3
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26

Brands by name

Popular brands

Load more brands