manualshive.com logo in svg

Hyundai 2006 Accent, Owner'S Manual

The 2006 Hyundai Accent Owner's Manual is a comprehensive guide that provides valuable information on maintaining and operating your Hyundai Accent. This manual is available for free download from manualshive.com, ensuring easy access to the manual's wealth of knowledge, empowering Accent owners to maximize their vehicle's performance and longevity.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

56

!

WARNING:

o The space between the occupant and

the curtain airbag must never be
occupied by children, passengers or
pets. Occupants should never lean
out or have any parts of their body
protruding from the window while the
engine is running.

o Do not move the sun visor out to

cover the side window if there is an
item attached to it such as a garage
door remote control, pens, air fresh-
eners or the like. These objects could
cause injury if the Curtain Airbag is
deployed.

o Where sun blinds are fitted to the

rear doors, these must not obstruct
or impair the airbag in any way.

o Do not install any accessories or

children’s toys in the Curtain Airbag
deployment zones, as this may im-
pair the operation of the system or
throw parts of them into the vehicle
cabin causing injury to occupants if
the system is deployed.

B990C01JM-GAT

Curtain Airbag (If Installed)

Curtain airbags are located along both
sides of the roof rails above the front and
rear doors. They are designed to help
protect the heads of the front seat occu-
pants and the rear outboard seat occu-
pants in certain side impact collisions.

The curtain airbags are designed to de-
ploy only during certain side impact col-
lisions, depending on the crash severity,
angle, speed and impact. The curtain
airbags are not designed to deploy in all
side impact situations, collisions from the
front or rear of the vehicle or in most
rollover situations.

B990C01MC

Curtain Airbag

!

WARNING:

o Before installing child restraints ,

always refer to “Child Restraint Sys-
tem” to ensure correct installation
and occupant protection is maxi-
mized.

o Make sure that the occupant does

not have any body parts (head, arms
& legs) protruding outside the re-
straining system. An inflating airbag
that strikes an infant child on the
head could cause serious injury.

o Ensure the opening for the Curtain

Airbag System remains unob-
structed at all times, so that the
airbags can inflate properly if needed.

Important Safety Notes for Curtain
Airbag Systems

Following is a number of safety points
concerning this system which should al-
ways be observed to ensure risk of injury
is reduced in an accident.

Summary of Contents for 2006 Accent























































































































































































































































































Reviews:

No comments

Related manuals for 2006 Accent

Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
iDataLink maestro Pr 2 Install Manual preview
maestro Pr 2
Brand: iDataLink Pages: 99
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
Gator GX5HDKT User Manual preview
GX5HDKT
Brand: Gator Pages: 8
Acura 2006 TSX Owner'S Manual preview
2006 TSX
Brand: Acura Pages: 2
Chevrolet 1999 Malibu Owner'S Manual preview
1999 Malibu
Brand: Chevrolet Pages: 344
Prorack K692 Fitting Instructions Manual preview
K692
Brand: Prorack Pages: 15
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
Voxoa MCU-20A(P40) User Manual preview
MCU-20A(P40)
Brand: Voxoa Pages: 48
VDO RUDDER ANGLE INDICATOR Installation Instructions Manual preview
RUDDER ANGLE INDICATOR
Brand: VDO Pages: 8
Chevrolet 1996 Cavalier Owner'S Manual preview
1996 Cavalier
Brand: Chevrolet Pages: 372
Subaru Impreza 2.5GT Specifications preview
Impreza 2.5GT
Brand: Subaru Pages: 2
Subaru 1999 Impreza Owner'S Manual preview
1999 Impreza
Brand: Subaru Pages: 328
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Rostra RearSight 250-8308 Installation Instructions preview
RearSight 250-8308
Brand: Rostra Pages: 2

Brands by name

Popular brands

Load more brands