manualshive.com logo in svg

Hyundai 2006 Accent, Owner'S Manual

The 2006 Hyundai Accent Owner's Manual is a comprehensive guide that provides valuable information on maintaining and operating your Hyundai Accent. This manual is available for free download from manualshive.com, ensuring easy access to the manual's wealth of knowledge, empowering Accent owners to maximize their vehicle's performance and longevity.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

37

1

FEATURES OF YOUR HYUNDAI

37

B230F01A-AAT

Child Restraint System Installation
on Rear Seat Center Position

Use the center seat belt for the rear seat
to secure the child restraint system as
illustrated. After installation of the child
restraint system, rock the child seat back
and forth, and side to side to ensure that
it is properly secured by the seat belt. If
the child seat moves, readjust the length
of the seat belt. Then, if equipped, insert
the child restraint tether strap hook into
the child restraint hook holder and tighten
to secure the seat. Always refer to the
child restraint system manufacturer's rec-
ommendation before installing the child
restraint system in your vehicle.

B230F02MC

To install a child restraint system in the
outboard rear seats, extend the shoulder/
lap belt entirely from its retractor until a
"click" is felt. This will engage the seat belt
retractor automatic locking feature, which
allows the seat belt to retract but not
extend. Install the child restraint system,
buckle the seat belt and allow the seat
belt to take up any slack. Make sure that
the lap portion of the belt is tight around
the child restraint system and the shoul-
der portion of the belt is positioned so that
it cannot interfere with the child's head or
neck. Also, double check to be sure that

B230G02MC-AAT

Child Restraint System Installation
on Outboard Rear Seats

B230G01MC

the retractor has  engaged the automatic
locking feature by trying to extend web-
bing out of the retractor. If the retractor is
in the automatic locking mode, the belt
will be locked. After installation of the
child restraint system, try to move it in all
directions to be sure the child restraint
system is securely installed. If you need
to tighten the belt, pull more webbing
toward the retractor. When you unbuckle
the seat belt and allow it to retract, the
retractor will automatically revert back to
its normal seated passenger emergency
locking usage condition.

NOTE:

o Before installing the child restraint

system, read the instructions sup-
plied by the child restraint system
manufacturer.

o If the seat belt does not operate as

described, have the system checked
immediately by your authorized
Hyundai dealer.

Summary of Contents for 2006 Accent























































































































































































































































































Reviews:

No comments

Related manuals for 2006 Accent

RaceChip Pro 2 Installation Manual preview
Pro 2
Brand: RaceChip Pages: 12
Kia 2011 optima Owner'S Manual preview
2011 optima
Brand: Kia Pages: 385
TrailFX A4012S Installation Instructions Manual preview
A4012S
Brand: TrailFX Pages: 6
Raytel LLC TellPhone 4200 Installation Instructions & Operating Manual preview
TellPhone 4200
Brand: Raytel LLC Pages: 40
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Dodge 2005 JR41 Stratus Owner'S Manual preview
2005 JR41 Stratus
Brand: Dodge Pages: 293
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Huf HUF8432MS Technical Description And User Manual preview
HUF8432MS
Brand: Huf Pages: 6
Jaeger 21010508J Fitting Instructions Manual preview
21010508J
Brand: Jaeger Pages: 14
Porsche 928 GTS 1994 Owner'S Manual preview
928 GTS 1994
Brand: Porsche Pages: 127
iDataLink BLADE-AL-HK4-EN Install Manual preview
BLADE-AL-HK4-EN
Brand: iDataLink Pages: 35
Advent MAZBTSW2 Owner'S Manual preview
MAZBTSW2
Brand: Advent Pages: 8
Axxess AXDSPX-TY3 Installation Instructions Manual preview
AXDSPX-TY3
Brand: Axxess Pages: 16
TrailPRO TPRGBW4 Quick Start Manual preview
TPRGBW4
Brand: TrailPRO Pages: 3
Kia D9062 ADU00 Manual preview
D9062 ADU00
Brand: Kia Pages: 17
Hopkins Engager Instructions preview
Engager
Brand: Hopkins Pages: 4
Paser KIT052USSU12 Manual preview
KIT052USSU12
Brand: Paser Pages: 10
E-Trailer E-LEVEL Product Manual preview
E-LEVEL
Brand: E-Trailer Pages: 8

Brands by name

Popular brands

Load more brands