manualshive.com logo in svg

Hyundai 2006 Accent, Owner'S Manual

The 2006 Hyundai Accent Owner's Manual is a comprehensive guide that provides valuable information on maintaining and operating your Hyundai Accent. This manual is available for free download from manualshive.com, ensuring easy access to the manual's wealth of knowledge, empowering Accent owners to maximize their vehicle's performance and longevity.

Share
Download
background image

1

FEATURES OF YOUR HYUNDAI

25

1

FEATURES OF YOUR HYUNDAI

25

B160D01A-AAT

When to Replace Seat Belts

Entire in-use seat belt assemblies should
be replaced if the vehicle has been in-
volved in an accident. This should be
done even if no damage is visible. Addi-
tional questions concerning seat belt
operation should be directed to your
Hyundai Dealer.

B160C01A-AAT

Keep Belts Clean and Dry

Seat belts should be kept clean and dry.
If belts become dirty, they can be cleaned
by using a mild soap solution and warm
water. Bleach, dye, strong detergents or
abrasives should not be used because
they may damage and weaken the fabric.

B170A02MC-AAT

HEIGHT ADJUSTABLE FRONT SEAT
SHOULDER BELT

B170A01MC

You can adjust the height of the shoulder
belt anchor to one of the 4 positions for
maximum comfort and safety.
If the height of the adjusting seat belt is
too near your neck, you will not be getting
the most effective protection. The shoul-
der portion should be adjusted so that it
lies across your chest and midway over
your shoulder nearest the door and not
your neck. To adjust the height of the seat
belt anchor, lower or raise the height
adjuster into an appropriate position. To
raise the height adjuster,  pull it up.

To lower it, push it down while pressing
the height adjuster button. Release the
button to lock the anchor into position. Try
sliding the height adjuster to make sure
that it has locked into the position.

B160B01A-AAT

Periodic Inspection

It is recommended that all seat belts be
inspected periodically for wear or dam-
age of any kind. Parts of the system that
are damaged should be replaced as soon
as possible.

OMC025042-1

!

CAUTION:

o Adjust the shoulder belt height when

you sit well back in the seat.

o When adjusting the shoulder belt

height, grip the height adjuster but-
ton securely and slide the height
adjuster up or down.

Summary of Contents for 2006 Accent























































































































































































































































































Reviews:

No comments

Related manuals for 2006 Accent

Samsung HF1000 User Manual preview
HF1000
Brand: Samsung Pages: 133
JANE MICRO Quick Start Manual preview
MICRO
Brand: JANE Pages: 6
VanEssa mobilcamping V1 User Instruction preview
V1
Brand: VanEssa mobilcamping Pages: 8
Zavoli Bora Technical Instructions And Installation Manual preview
Bora
Brand: Zavoli Pages: 26
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Blue Ox BX3781 Installation Instructions Manual preview
BX3781
Brand: Blue Ox Pages: 7
Shad NADSA ATV80 Owner'S Manual preview
NADSA ATV80
Brand: Shad Pages: 3
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
Great Wall WEY VV5 Service Manual preview
WEY VV5
Brand: Great Wall Pages: 18
WIX WP9378 Installation Instruction preview
WP9378
Brand: WIX Pages: 2
Cadillac 1999 Escalade Owner'S Manual preview
1999 Escalade
Brand: Cadillac Pages: 352
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10
Kia Picanto Manual preview
Picanto
Brand: Kia Pages: 680
TATA Motors INDICA eV2 XETA CNG Supplemental Owner'S Manual preview
INDICA eV2 XETA CNG
Brand: TATA Motors Pages: 24

Brands by name

Popular brands

Load more brands