manualshive.com logo in svg

Hyundai 2006 Accent, Owner'S Manual

The 2006 Hyundai Accent Owner's Manual is a comprehensive guide that provides valuable information on maintaining and operating your Hyundai Accent. This manual is available for free download from manualshive.com, ensuring easy access to the manual's wealth of knowledge, empowering Accent owners to maximize their vehicle's performance and longevity.

Share
Download
background image

DRIVING YOUR HYUNDAI

17

2

C160D01A-AAT

Check Battery and Cables

Winter puts additional burdens on the
battery system. Visually inspect the bat-
tery and cables as described in Section
6. The level of charge in your battery can
be checked by your Hyundai dealer or a
service station.

C160C01A-AAT

Use High Quality Ethylene Glycol
Coolant

Your Hyundai is delivered with high qual-
ity ethylene glycol coolant in the cooling
system. It is the only type of coolant that
should be used because it helps prevent
corrosion in the cooling system, lubri-
cates the water pump and prevents freez-
ing. Be sure to replace or replenish your
coolant in accordance with the  mainte-
nance schedule in Section 5. Before win-
ter, have your coolant tested to assure
that its freezing point is sufficient for the
temperatures anticipated during the win-
ter.

C160B01A-AAT

Snowy or Icy Conditions

To drive your vehicle in deep snow, it may
be necessary to use snow tires or to
install tire chains on your tires. If snow
tires are needed, it is necessary to select
tires equivalent in size and type to the
original equipment tires. Failure to do so
may adversely affect the safety and han-
dling of your car. Furthermore, speeding,
rapid acceleration, sudden brake appli-
cations, and sharp turns are potentially
very hazardous practices.
During deceleration, use engine braking
to the fullest extent. Sudden brake appli-
cations on snowy or icy roads may cause
skids to occur. You need to keep suffi-
cient distance between the vehicle in
operation in front and your vehicle. Also,
apply the brake gently. It should be noted
that installing tire chains on the tire will
provide a greater driving force, but will
not prevent side skids.

NOTE:

Tire chains are not legal in all states.
Check state laws before fitting tire
chains.

C160E01A-AAT

Change to "Winter Weight" Oil if
Necessary

In some climates it is recommended that
a lower viscosity "winter weight" oil be
used during cold weather. See Section 9
for recommendations. If you aren't sure
what weight oil you should use, consult
your Hyundai dealer.

C160F01A-AAT

Check Spark Plugs and Ignition
System

Inspect your spark plugs as described in
Section 6 and replace them if necessary.
Also check all ignition wiring and compo-
nents to be sure they are not cracked,
worn or damaged in any way.

Summary of Contents for 2006 Accent























































































































































































































































































Reviews:

No comments

Related manuals for 2006 Accent

Qube AP1 Supplemental Instructions preview
AP1
Brand: Qube Pages: 19
Cadillac 2000 Warranty And Owner Assistance Information preview
2000
Brand: Cadillac Pages: 32
Jeda Wireless Pad Manual preview
Wireless Pad
Brand: Jeda Pages: 8
Jeep 2009 Wrangler Owner'S Manual preview
2009 Wrangler
Brand: Jeep Pages: 496
Kargo Master 80070 Assembly Lnstructions preview
80070
Brand: Kargo Master Pages: 13
Kargo Master 4A96L Installation Manual preview
4A96L
Brand: Kargo Master Pages: 21
Kargo Master 40201 Installation Manual preview
40201
Brand: Kargo Master Pages: 4
Taffio CH7102-FCX9 Quick Start Manual preview
CH7102-FCX9
Brand: Taffio Pages: 8
Toyota 2016 RAV4 Quick Reference Manual preview
2016 RAV4
Brand: Toyota Pages: 56
Toyota RX450h 2010 Emergency Response Manual preview
RX450h 2010
Brand: Toyota Pages: 35
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
tams elektronik FCS-4 Manual preview
FCS-4
Brand: tams elektronik Pages: 19
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
BraunAbility Rampvan Maintenance And Service Manual preview
Rampvan
Brand: BraunAbility Pages: 46
BabySafe Beagle User Manual preview
Beagle
Brand: BabySafe Pages: 43

Brands by name

Popular brands

Load more brands