Hytera X1ei, Owner'S Manual

Page: 7 / 38

3
“Click” “Click”
ON OFF
Basic Operation
Turning the Radio On/Off
Adjusting the Volume
You can adjust the volume of output voice, alert tone
and channel notification tone by rotating the
Volume
Control Knob . For other tones, the volume will be
configured by the dealer.
Selecting a Zone
A zone is a group of channels with the same property,
which can facilitate convenient management over
the channels. The radio supports 3 zones, each of
which consists of up to 16 channels. Your dealer
can program the zone for your specific needs. You
can switch to the appropriate zone by pressing the
programmed
Zone Up or Zone Down key preset by
your dealer.
Selecting a Channel
Note:
If the Channel Notif y feature is
enabled by your dealer, the radio will
a n n o u n c e t h e c h a n n e l n u m b e r u p o n
channel switching.
Call Services
After the radio is powered on, you can make and
receive calls. To ensure optimal volume of the
receiving radio, keep the microphone about 2.5 to 5
centimeters away from your mouth when transmitting.
Private Call
Initiating a Private Call
In the home screen, hold down the PTT key to initiate
a private call to the private contact preset for the
current channel.
You may request your dealer to preset a regular
private contact, group contact or all call contact for
each digital channel.
Receiving and Responding to a Private
Call
When you receive a private call, you can listen to it
without any operation and hold down the
PTT key to
call back within the preset time.
Group Call
Initiating a Group Call
In the standby mode, hold down the PTT key to
initiate a group call to the group contact preset for the
current channel.
Receiving and Responding to a Group Call
When you receive a group call, you can listen to it
without any operation and hold down the
PTT key to
call back within the preset time.
Call on Analog Channel (Without
Signaling)
To transmit on an analog channel, hold down the PTT
and speak into the microphone. To receive, release
the PTT key.
Please refer to the Feature Description and Operation
Manual along with the product for operation
description on how to make and receive calls on the
analog channel with signaling.
Emergency Alarm
In case of emergency, you can use Emergency Call
to ask for help from your companion or the control
center.
Emergency Call needs to be configured and
enabled by your dealer. Please refer to the Feature
Description and Operation Manual along with the
product for details.
2.5~5.0CM