Step 3
Replace the cover and tighten the screw as shown in the figure below.
3.4
Attaching the Belt Clip
Step 1
Remove the two screws on the back of the terminal.
Step 2
Align the screw holes on the belt clip with those on the terminal, and then tighten the screws, as
shown in the figure below.
3.5
Attaching the Accessories
Step 1
Loosen the screw on the accessory connector cover, and open the cover as the arrow shows in
the figure below.
Summary of Contents for TETRA PT560H F4
Page 5: ...10 FCC STATEMENT 25...
