3
√
X
X
Before Use
Attaching the Battery
Note: To remove the battery, turn off the
radio first, and then slide the battery latch
upwards to unlock the battery.
Attaching the Antenna
Caution: Do not hold the radio by its antenna,
otherwise the performance and lifespan of the
antenna will be reduced.
Attaching the Belt Clip
Step 1 Remove the screws.
Step 2 Align the screw holes on the belt clip with
those on the radio’s back, and then tighten the
screws.
"click "
Attaching the Accessories
Step 1 Open the accessory connector cover as shown
below.
Step 2 A l i g n t h e a c c e s s o r y ( s u c h a s a n a u d i o
accessory, or a programming cable) plug with
the accessory connector.
Caution: Do not scrape the silicone rubber
surrounding the accessory connector screw
hole, in order to ensure the waterproof
performance of the radio.
Step 3 Tighten the screw on the plug.
Charging the Battery
Caution:
●
Use the charger specified by the Company
to charge the battery.
●
Make sure the radio is powered off before
charging. Read the Safety Information
Booklet in advance to get necessary safety
information.
●
Charge a new battery for at least 5 hours
before initial use for best performance.
