PD702 User Guide
Quick Reference
Quick Reference User Guide
Radio Guide for
Microphone
Accessory / Programming Port
Left View
Front View
Speaker
Power / Volume Knob
Channel Knob
Radio Operation
Charging the Radio
Turning the Radio On
•
Please ensure the radio is off when charging
•
Charging while the radio is on shortens the lifespan of your battery
•
Full charge may take up to 3 hours
•
The radio should be placed in the charger with the battery (front of
radio) facing the front of the charger.
•
Rotate the on / off volume knob to power on & set the volume
•
If the radio is tuned to a non‐programmed channel it will emit a continuous
error tone
•
Please reference the zone / channel list to select the appropriate channel
Transmitting Voice Calls
Receiving Voice Calls
•
To initiate a transmission hold the Push to Talk (PTT) Button
•
Once you press the PTT Button, the radio will emit a talk permit chirp
•
This talk permit chirp signals that you can begin to speak
•
When done speaking release the PTT Button
•
For a set period of time the system resources are held to allow
immediate responses
•
If there is no response within this period the system will be released
signaled by a call ended chirp
•
Portables automatically receive transmissions on the Talkgroup
Channel Controls
•
There are zones
•
Each zone has channels programmed
•
To switch zones
•
To switch channels Turn the Channel Knob
Push to Talk Button
Long Press
Short Press
Long Press
Short Press
Long Press
Short Press