Mode
Manner
Operation
2. Select the all call log from the list.
3. Press
or press and hold the
PTT
key.
Receiving an All Call
When you receive an all call, the radio displays
, and the call is
established automatically.
Ending an All Call
In conventional mode, an all call ends when the Time-out Timer (TOT)
expires.
In trunking mode, an all call ends in any of the following cases:
l
The calling party ends the call.
l
The call duration exceeds the period preset by your dealer.
l
A preemptive or emergency call interrupts the call.
l
The base station signal is lost.
Broadcast Call (Trunking Only)
A broadcast call is a special group call to which the called party cannot
respond. The radio must be authorized by your dealer for you to initiate a
broadcast call.
Initiating a Broadcast Call
The following table describes how to initiate a broadcast call.
Manner
Operation
Favorites
1. Go to
Menu
>
Contact
>
Favorites
.
2. Select the target group contact, and then press the
OK/Menu
key.
3. Select
Call Type
, and then select
Broadcast Call
.
4. Press
or press and hold the
PTT
key.
Subgroup
1. Press the preprogrammed
Subgroup
key or go to
Menu
>
Subgroup
.
2. Select the required subgroup, and then select
Member
.
3. Select the target group contact, and then press the
OK/Menu
key.
4. Select
Call Type
, and then select
Broadcast Call
.
5. Press
or press and hold the
PTT
key.
Call Log
1. Go to
Menu
>
Call Logs
>
Outgoing
/
Incoming
/
Missed
>
Outgoing List
/
Incoming List
/
Missed List
.
2. Select the target group contact, and then press the
OK/Menu
key.
19
