36
If the Alarm w/Call To Follow feature is preprogrammed by your dealer, you can speak into the microphone without
pressing and holding the
PTT
key. If the preset voice cycles expire, you can press and hold the
PTT
key to initiate
the emergency call again.
8.11.2 Receiving an Emergency Call
You can answer an emergency call without any operation.
8.11.3 Ending an Emergency Call
The calling party can end an emergency call in either of the following ways:
Press the preprogrammed
Emergency Off
key.
Turn off the radio.
The called party can exit an emergency call by switching the channel or turning off the radio.
8.12 Kill and Revive
You can send the Kill command to a private contact to kill its radio. The killed radio is incapable of any function
except the remote monitor. The killed radio must be reprogrammed by your dealer or revived by the Revive
command for reuse.
You can send the Revive command to a private contact to restore its radio to normal use.
8.13 Emergency Erase Data
The Emergency Erase Data feature allows the radio to erase encrypted data in case of emergency, so as to prevent
unauthorized access. When erasing the data, the radio stops voice and data services and returns to the home screen.
If this feature is preprogrammed by your dealer, the encrypted data can be erased in the following cases:
Press
SK1
and then the
PTT
key (within 1.5s) for two times, and then press
SK1
again.
When the radio is killed, the data on the radio will be erased automatically.