4500 SRM 971
Reach Assembly Outer Frame
1.
RETAINER
2.
LOCKWASHER
3.
CAPSCREW
4.
PIN
5.
CAPSCREW
6.
TRUNNION CAP
7.
FIXED FRAME
8.
PIVOT PIN
9.
BUSHING
10. BUSHING
11. TILT CYLINDER
12. TILTING FRAME
13. CAPSCREW
14. CAPSCREW
Figure 8. Outer Frame Without Sideshifter
6.
Remove mobile frame (21). (Used on sideshift
only.)
7.
Remove polymer wear strips (1, 2, 3, and 19).
8.
Remove pin-retaining hardware (4, 5, and 6).
9.
Use a punch to remove pins (8).
10. Remove tilting frame (18).
11. Remove (13 through 17) only if needed for ser-
vice.
12. Remove tilt cylinder trunnion cap and hardware
(11, 12, 25).
13. Remove tilt cylinder bushing (26).
14. Remove tilt cylinder (7).
15. Remove bushing from fixed frame (21).
11
