1.
ITEM OR COMPONENT BEING CHECKED
2.
LCD SCREEN
3.
CHECK MARK (* KEY)
4.
X MARK (# KEY)
Figure 15. Operator Checklist Screen
Mounting and Dismounting
WARNING
To avoid serious injury when entering or exiting the lift
truck, ALWAYS USE 3 POINTS OF CONTACT. Maintain
contact simultaneously with two hands and one foot or
with two feet and one hand while climbing on or off the
lift truck.
Place feet carefully. Always face the lift truck when climbing
on or off. Use added care when surfaces are slippery. Keep
hands free of any obstacles such as food, beverages, or
tools.
If equipped, be sure cab door is secured in the closed posi-
tion or removed before starting lift truck operations.
Start-Up Procedure - SRO Circuit
Lift Trucks with Software Versions Less than 4.32
The lift trucks covered in this manual are equipped with a
Static Return to OFF (SRO)
circuit that prevents travel of
the lift truck if the starting sequence is not correct. The
function of the SRO circuit is to make sure the operator is
in the correct position to operator the controls before the lift
truck will operate. The starting sequence:
1.
Sit on the seat to close seat switch. Check to ensure all
operator controls, traction and hydraulic, are in the neutral
position. If a control is not in a neutral position, it must be
returned to neutral and remain in the neutral position for 0.1
Operating Procedures
89
Property of American Airlines
