iRIS 350FX Reference Manual V1.50
49
HyQuest Solutions (NZ) Ltd
- PO Box 9466, Hamilton, New Zealand Tel: +64 7 857-0810 Email: [email protected]
Keypad Buttons
The four keypad buttons are used to navigate through the LCD screens. Their use varies depending upon the
current screen in view; however the key combinations listed below are constant for all screens.
To move down a level in the menu structure, press the <Enter> key. To move up a level press the <Alt> and
<Enter> keys simultaneously. You can scroll through the screens that are followed by a number in square
brackets (e.g. [1..4]) by pressing the + or - keys (stepping forwards and backwards respectively).
Primary LCD Display Screens
7.2.5.1
Log In Screen (Level 0, when not logged in)
The Log-In screen is a special screen that is allocated level 0. It is used to enter a PIN number and then enable
access to restricted screens. It is reached by pressing the Alt and Enter keys simultaneously from any of the
four System Status screens when the unit is not logged in.
Once the PIN number matches that programmed into the device and the <Enter> key is pressed, the user will
be logged in and returned to the top-level Welcome (System Status 1) screen. A successful login will also
remove the padlock icon from the top of the display.
7.2.5.2
System Status 1 Screen (Level 1)
The System Status 1 screen is the default screen shown at system power up, hence its designation as display
level 1. Useful information shown on this screen includes the site name, model, serial number, iQuest
protocol communications address and the current time and date.
7.2.5.3
System Status 2 Screen (Level 1)
The System Status 2 screen is always available, no matter what level of access has been selected. The
information shown on this screen includes the firmware (F) and software (S) version numbers,
communications module and if applicable, the scripted variant.
My Site Name
iRIS 350FX AG4-1234
Address: 1
14:39:23 07 Oct 13
-
Unused
+
Move across to System Status 2 screen
Enter
Move down to main menu screen
Alt Enter
Log in (If PIN code <> 0), otherwise unused
LOG IN
Pin No. 0000
+/-
Increment/decrement PIN number
Enter
Multiply PIN number by 10 or accept
PIN number as displayed. Moves back
to System Status 1 screen
Firmware: 1.40
Software: 1.30
Comms: Sierra Q26
Modbus (RTU 9600)
-
Move back to System Status 1 screen
+
Move forward to System Status 3 screen
Enter
Move down to Main Menu screen
Alt Enter
Log in (If PIN code <> 0), otherwise unused
Summary of Contents for iRIS 350FX
Page 8: ......