Hypro warrants to the original purchaser of its products (the “Purchaser”) that such products will be free from defects in material and
workmanship under normal use for the period of one (1) year for all products except: oil crankcase plunger pumps will be free from
defects in material and workmanship under normal use for the period of five (5) years, and accessories will be free from defects in
material and workmanship under normal use for the period of ninety (90) days. In addition, Hypro warrants to the purchaser all forged
brass pump manifolds will be free from defects in material and workmanship under normal use and from damage resulting from
environmental conditions for the life of the pump.
“Normal use” does not include use in excess of recommended maximum speeds, pressures, vacuums and temperatures, or use
requiring handling of fluids not compatible with component materials, as noted in Hypro product catalogs, technical literature, and
instructions. This warranty does not cover freight damage, freezing damage, normal wear and tear, or damage caused by
misapplication, fault, negligence, alterations, or repair that affects the performance or reliability of the product.
THIS WARRANTY IS EXCLUSIVE. HYPRO MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Hypro’s obligation under this warranty is, at Hypro’s option, to either repair or replace the product upon return of the entire product to
the Hypro factory in accordance with the return procedures set forth below.
THIS IS THE EXCLUSIVE REMEDY FOR ANY
BREACH OF WARRANTY.
IN NO EVENT SHALL HYPRO BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND,
WHETHER FOR BREACH OF ANY WARRANTY, FOR NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY, OR OTHERWISE.
Return Procedures
All pumps or products must be flushed of any chemical (ref. OSHA Section 0910.1200 (d)(e)(f)(g)(h) and hazardous chemicals must
be labeled before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material Safety
Data sheet from the Purchaser for any pump or product Hypro deems necessary. Hypro reserves the right to “disposition as scrap”
pumps or products returned which contain unknown substances, or to charge for any and all costs incurred for chemical testing and
proper disposal of components containing unknown substances. Hypro requests this in order to protect the environment and
personnel from the hazards of handling unknown substances.
For technical or application assistance, call the Hypro Technical/Application number: 800-445-8360.
To obtain service or warranty assistance, call the Hypro Service and Warranty number: 800-468-3428; or call the Hypro Service and
Warranty FAX: (651) 766-6618.
Be prepared to give Hypro full details of the problem, including the following information:
1. Model number and the date and from whom you purchased your pump.
2. A brief description of the pump problem, including the following:
• Liquid pumped. State the pH and any non-soluble
• Drive type (gas engine/electric motor; direct/belt drive;
materials, and give the generic or trade name.
tractor PTO) and rpm of pump.
• Temperature of the liquid and ambient environment.
• Viscosity (of oil, or other than water weight liquid).
• Suction lift or vacuum (measured at the pump).
• Elevation from the pump to the discharge point.
• Discharge pressure.
• Size and material of suction and discharge line.
• Size, type, and mesh of the suction strainer.
• Type of spray gun, orifice size, unloader/relief valve.
Hypro may request additional information, and may require a sketch to illustrate the problem. Contact the factory to receive a return
material authorization before sending the product. All pumps returned for warranty work should be sent shipping charges prepaid to:
HYPRO
Attention: Service Department
375 Fifth Avenue NW
New Brighton, Minnesota 55112
*Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous materials being
shipped. Failure to do so may result in a substantial fine and/or prison term. Check with your shipping company for specific
instructions.
Hypro 2008
Printed in the USA
Limited Warranty on Hypro Pumps
