Quick Start Guide
HyperX
Cloud
Alpha S Firmware
Updater
I.
Updating the USB audio control mixer
1.
Connect the USB audio control mixer to a USB port on the PC.
2.
Run the HyperX Cloud Alpha S Firmware Updater (i.e.
“HyperX_Cloud_Alpha_S_Firmware_Updater_4104.exe”
).
3.
Click the “
Update”
button to start the update.
4.
A warning prompt will pop up. Do not disconnect or power down the device during the upgrade
process. Click the “
OK”
button to continue.
5.
A prompt will pop up when the firmware update is complete. Click the
“OK”
button to continue.