© Copyright 2018 HYPERVSN. All rights reserved
13
3.
Do not install the Device in areas affected by high temperatures, heavy
steam/vapor, large volumes of dust, air conditioners, radiators/heaters, ovens and
other similar equipment. Ensure that Devices are properly ventilated.
Please carefully read the requirements below to achieve optimal holographic effects from
the Device, ensuring that your visuals appear to be floating in mid-air.
4.
The most suitable background color for Wall installations is dark matte grey
(anthracite). Textured / patterned backgrounds are also recommended.
5.
Do not install the Wall against white/lightly colored backgrounds or in close
proximity to bright light sources such as, large LED displays or projector screens.
6.
It is not recommended to install the Wall under direct sunlight or light from lighting
fixtures.
7.
It is preferable to install the Wall on partitioned walls, where there is a possibility
to hide the Device
’
s power cords (that could decrease the overall aesthetic appeal
of the Wall).
8.
Where possible, have the rays exceed the installation surface to showcase the
transparent nature of the Device
’s
display.
4.3
MOUNTING SURFACE REQUIREMENTS
Warning! Surface requirements are one of the most important
aspects
of the Wall’s installation. They
must be respected and
followed without exception. The manufacturer declines all
responsibility for any injuries and Devices failures should the
mounting surfaces requirements not be met.
1.
The
mounting surface’s maximum weight
must exceed the Wall
’s
weight.
The Wall
’s
weight is calculated with the following formula: 4,2*Y where:
•
Y
i
s the number of Devices,
•
4,2
is the unit
weight of one Device (mount included).
T
he current formula does not take into account other objects that might be
mounted onto wall surfaces (shelves or other suspended objects).
Attention.
Under NO circumstances should you proceed with the Wall installation if the
maximum weight of your mounting surface is less than the weight of the Wall.
2.
Mounting surfaces must be leveled and made of non-flexible, chatter-resistant
material.