10
© Copyright 2018 HYPERVSN. All rights reserved
PARAMETERS DESCRIPTION
VALUE
AC plug
B, F, G, H type
AC plug type is dependent on the country
of destination (consumer region)
Remote control (optional)
RF type (Model M)
IR type (Model MS)
Battery (for remote control)
CR2016, 3V (model M)
CR3032, 3V (model MS)
The Device has Class A electromagnetic compatibility
.
Attention.
Operation of this equipment in a residential environment could cause radio
interference.
The Device is to be connected to single-phase alternating current mains (with the
specified voltage and frequency) and can be operated continuously while plugged in.
3.2
WI-FI NETWORK REQUIREMENTS
Table 7. Network requirements
WALL TYPE
Wall is not equipped with the Masterbox
•
With a built-in NTP-server or with
the capability to install an NTP -
server.
Note
. NTP - (Network Time Protocol)
–
is a means of synchronizing clocks over
the Internet.
•
Sustainable Internet connection is
required for the Devices activation
.
•
The Wall operation requires a
direct Wi-Fi connection for Devices
with a router (Internet connection
is not required).
•
Choose a less congested Wi-Fi
channel.
•
Avoid physical barriers between
the router and the Wall. Distance
form the router: - up to 3 meters.
•
Preferable router location:
Model M
–
in front of the Devices,
Model MS
–
above/below/behind
the Devices.
•
Wi-Fi frequency: 2.4GHz.
•
Router network mode: b/g.