Hypertherm XPR300, Instruction Manual

Page: 212 / 402

Operation
6
212 809480 Instruction Manual XPR300
Bevel compensation tables
Hypertherm’s TrueBevel™ software has specialized cut charts called “bevel compensation tables.”
They can help you get the best results on mild steel with minimal operator intervention.

For information about how to access and use the bevel compensation
tables, refer to the instruction manual that came with your Hypertherm
CAM software.
Hypertherm’s ProNest
TM
software includes bevel-compensation tables.

For information about CNC compatibility requirements and how to use
bevel compensation tables with non-Hypertherm CNCs, contact your
cutting machine supplier or regional Hypertherm Technical Service team.
Ferrous (mild steel) processes
Ferrous (mild steel) processes are developed for cutting A36 mild steel. All mild steel processes are
available with all 3 XPR gas connect consoles (OptiMix, VWI, and Core). Mild steel processes use
O
2
/Air in most cases, except for the following:

Lower-current cutting processes on thinner metals use O
2
/O
2
.

The 300 A processes, on some thicknesses, use O
2
/N
2
.

Argon-assist technology uses argon (Ar) in the shield to increase pierce capacity.

See the XPR300 Cut Charts Instruction Manual (809830) for information
about the gases used for plasma gas and shield gas during different
processes.
All mild steel processes use Hypertherm’s enhanced LongLife ® technology that works together with
Arc-Response technology to extend the life of consumables by detecting and reacting to rampdown
errors before they occur.

The consumable parts for 300 A processes are non-vented and use a
liquid-cooled nozzle (in place of a vented, air-cooled nozzle).
HyDefinition vented
processes
The XPR300 cutting system offers HyDefinition vented consumables for 30 A – 170 A
processes. The processes enable the operator to achieve the following results:
• High-quality cuts
• Dross-free cutting (metal dependent)
• Fast cut speeds
HyDefinition 300 A
process
The 300 A process is non-vented and delivers the following cutting options:
• High-quality cuts
• Excellent consumable part life
• Dross-free cutting with most thicknesses (metal dependent)
• Consistent cut quality over the lifetime of the consumable parts