Hypertherm HyPrecision 15, Operator'S Manual

Page: 45 / 194

HyPrecision15/30/50 Operator Manual 808240 45
O
p
eration
Section 4
Operation
Safety
Refer to the instruction manual. Read and understand all of the safety guidelines in this manual.
WARNING
A waterjet is a cutting tool. A high-pressure injection injury is a surgical emergency. Seek immediate medical
treatment for all high-pressure waterjet injuries. Delayed treatment can lead to serious injuries or death.
WARNING
Do not operate the pump without the shaft access cover and all other safety devices correctly installed. Do
not remove guards while the pump is operating.
WARNING
Eye, ear, and respiratory protection, safety shoes, and other personal protective equipment are
recommended. Failure to wear personal protective equipment can result in injuries or death.
WARNING
Do not touch a hot surface.
Fittings can get hot, especially when they are not properly tightened.
CAUTION
If a water line, fitting, or valve might be frozen, do not operate the pump. Thaw the system until water moves
freely through the entire water circuit.
High-pressure water can cause eye injuries. Wear approved eye protection when operating or working near
this equipment.
This waterjet system might exceed national and local codes for permitted noise levels.
When this pump is running, the noise level is 80 to 85 dB(A). Noise level is related to factors such as water
flow rate, pipe layout, and the acoustical characteristics of the building.
Prolonged exposure to noise can cause permanent hearing loss. Wear approved ear protection and control
exposure time when operating or working near this equipment.
High-pressure water can cause severe cuts or lacerations, abrasions, and punctures. Wear approved hand
protection when operating or working near this equipment.