Hypermedia HG-3000, Product Manual

Page: 75 / 122

Hypermedia Systems
Configuring LCR
Release 5.3 (June 2013)
65
4.5 Rules
Rules determine to which Group a call is routed.
4.5.1 Creating a Rule
To create a Rule:
1.
From the HMC navigation pane’s LCR branch, click the
Rules sub-branch. The
Rules screen is displayed.
Figure 67. LCR Rules Screen
2. Place the cursor in an empty Rule # Prefix cell.
3. Enter the Prefix , that is, the first numbers of the destination number. The Prefix
is often the first numbers of a mobile phone service provider.
4. Configure the following:
1st Group
From the dropdown list, select the Group to which the LCR module will first
route calls with this prefix.
2nd / 3rd Group
Optionally, enter a second and third choice for where the call should be routed.
These choices are used when the 1st Group’s Resources are busy.
ACR
When this checkbox is selected, the gateway redirects the call to a database
containing Advanced Call Routing lists. The call is routed according to rules on
an external application with advanced routing options.
5. Optionally, repeats steps 2 until 4 for additional rules.