INSTALLATION INSTRUCTIONS
IDS-CCULD
Page 1 of 3 7L766 Rev A 180501
Step 1
—
Identify an appropriate
mounting location
Wall Mount
The CCULD should be mounted to a
structurally solid, wall surface using the
included bracket.
Mount by using the appropriate fasteners
and anchors for the mounting surface.
Fasteners and anchors are not provided.
Table Mount
The CCULD is equipped with rubber feet
for table mounting applications as well. The
feet are pre-installed.
Supplied Parts
•
IDS-CCULD
•
24VDC Power Supply
•
Ferrite Beads (x3)
•
Mounting Bracket
•
Antenna
Tools Required
•
Screw Driver, No. 2 Phillips
•
Drill
•
Mounting Hardware
•
Cat5 extension cables
OVERVIEW
This document pertains to installation of IDS-CCULD. For additional information regarding device setup and configuration, refer to
the Hyperion User Manual (Document #7L761) on our website: http://www.wrensolutions.com/hyperion/hyperion_support/
Hyperion Enabled Ports
(
for Hyperion devices only)
Digital Inputs
Outputs
Audio
Out
Antenna
Port
Network
Connection
Power
Input
