Hyper Extension HOME GYM 50036, Owner'S Manual, Page: 6 / 27

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended this machine be assembled by two or more people
to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Attach the Base Frame (#1) to the Rear Base Frame (#3). Secure them with two M10 x
70mm Carriage Bolts (#73), two
∅
10mm Washers (#87), and two M10 Nylon Nuts (#88).
B.) Attach the Foot Plate (#15) to the Base Frame (#1). Align the holes of the foot plate with
the hole in the Base Frame. Insert the Foot Plate Axle (#2) through the holes. Place Flat
End Cap (#55) in each end of foot plate (#15).
C.) Attach one bar protector (#68) to each side of the bar protector joint on Base Frame (#1)
D.) Attach the Vertical Frame (#5) to the Base Frame (#1). Secure it with two M10 x 70mm
Carriage Bolts (#73),
∅
10mm Washers (#87), and M10 Nylon Nuts (#88). DO NOT tighten
the Nuts and Bolts yet.
E.) Attach Butterfly Pulley Bracket (#17) to the Base Frame (#1). Secure it with two M10 x
70mm Carriage Bolts (#73),
∅
10mm Washers (#87), and M10 Nylon Nuts (#88).
F.) Slide Shiver Bar Frame (#29), Sleeve (#51) and Handle Grip (#48) onto Shiver Bar (#30)
DIAGRAM 1
65
83
- 6 -