Hyper Extension HOME GYM 50036, Owner'S Manual, Page: 13 / 27

STEP 7 (See Diagram 7)
A.) Place the Seat Pad (#21) onto the Seat Post (#9). Secure it with two M8 x 40mm Allen Bolts
(#77) and
∅
8mm Washers (#86).
B.) Insert the Seat Post (#9) into the opening on the Seat Support Frame (#6). Use a Lock Knob
(#41) to obtain the desired height of Seat.
C.) Insert two Foam Roll Tubes (#28) halfway through the holes on Seat Post and Leg
Developer. Push four Foam Rolls (#59) onto the Tubes from both ends. Plug four Foam Roll
End Caps (#54) onto the ends of the Tubes.
DIAGRAM 7
- 13 -