Hyper Extension HOME GYM 50036, Owner'S Manual, Page: 12 / 27

STEP 6 (See Diagram 6)
A.) Attach the Butterfly Base (#14) to the Vertical Frame (#5). Secure it with one 120 x 50mm
Bracket (#26), two M10 x 90mm Carriage Bolts (#74), two
∅
10mm Washers (#87), and
two M10 Nylon Nuts (#88).
B.) Insert the Right Butterfly (#20) into the right pivot on Butterfly Base. Secure it with one M10
x 20mm Allen Bolt (#79) and
∅
10mm Washer (#87) from the bottom.
C.) Insert the Butterfly Handle (#13) into the pivot on the Right Butterfly. Secure it with one M10
x 20mm Allen Bolt (#79) and
∅
1
0x33mm Washer (#61).
D.) Repeat Procedures B and C above to install the other side.
DIAGRAM 6
- 12 -