HYOSUNG TE 50, Owner'S Manual, Page: 43 / 48

★
INSPECTION AFTER CLEANING
Remove the rags or wrapping from the exhaust
pipe. For extended life of your ATV, lubricate
according to GENERAL LUBRICATION sec-
tion.
Operating ATV with wet brakes can be
hazardous.
Wet brakes may not provide as much
stopping power as dry brakes. This
could lead to an accident.
Test your brakes after washing ATV,
while riding at slow speed. If neces-
sary, apply brakes several times to let
friction dry out the linnings and pads.
WARNING
Follow the procedures in the INSPECTION
BEFORE RIDING section to check your ATV
for any problems that may have arisen during
your last ride.
42
★
WASHING YOUR ATV
With some care, your ATV can be washed in a
similar manner to washing an automobile.
NOTE : Avoid spraying or allowing water to
flow over the following places :
●
Spark plug
● Fuel tank cap
● Carburetor
Use a garden hose at low pressure to remove
the majority of dirt or other debris. Hand wash
your ATV with a mild soap or detergent and
water. Try to thoroughly remove all dirt and
debris without excessive water pressure. Cloth
rags, washing mitts or cleaning brushes can be
used, be careful with brushes as they may
scratch plastic or painted surfaces. Rinse the
ATV thoroughly with clean water. Dry all areas
using a chamois or soft absorbent cloth.
COPYRIGHTED