HYOSUNG MONiMAX8100T, Operator'S Manual, Page: 47 / 110

Chapter4. Receipt Printer (SPR60) Operator Manual
4-10 © Hyosung TNS Inc. All Rights Reserved.
Install and load the paper roll
► Before installing the paper roll, make sure the specification of paper roll is in conformity with
requirements of printer.
► Install load the paper roll
The paper roll is easy to be installed on SPR60, and the steps are as following:
Turn on the power, and then place the paper head in the paper feeding path as shown in the figure
below:
<Paper loading>
When the paper sensor detects paper, the platen rollers will start rotation to complete the semi-
automatic paper loading.
Caution:
Before loading paper, cut the paper head trim according to the figure below:
<Paper head>