EN © 2020 HYKKER.
All rights reserved.
CHRONO 4
15
paired with the smartwatch - an installed application is required (chapter 7.19). The
smartwatch screen will show a preview of the image from the smartphone camera
lens (with a slight delay). You can take a picture, it will be saved in the memory of
the smartphone. Before running this option, download the smartphone application
using the QR code from the previous page and pair the smartphone with the
smartwatch, then run the application.
7.23 Sound profiles
By selecting
icon the user may decide which sound profile is to be used on
the smartwatch. They are similar to those found in phones and smartphones. You
can choose from: General, Silent, Meeting, Ourdoor.
7.24 Calculator
The calculator app is switched on by pressing
icon. The application allows
you to perform basic operations - adding, subtracting, multiplying and dividing.
7.25 Sound recorder
This option does not work without installed microSD card.
By selecting the
icon from the menu, the user can use the built-in sound
recorder in the smartwatch. You can record an important conversation, lecture or
voice memo. If there are more recordings, you can switch to the next or previous
ones.
7.26 Sleep monitor
By selecting
icon
, the user can start the application monitoring sleep quality
and length. Once activated, it recognizes the user's hand movements if the
smartwatch is fastened at the wrist of the sleeping person. When you wake up, you
can pause or reset the sleep timer and sleep quality assessment.
The data is NOT
stored in the device memory and when the application is switched off or the device
is switched off, the counter will reset.
7.27 Alarm
By selecting the
icon from the menu, you can set the times when the alarm
will sound. It can remind you of important tasks, but also can act as an alarm clock.
You can select a ringtone.
