SPA
Page 20
5.
Operating Mode - Advanced Communica-
tion with the Control (Comfort-/Comfort
Plus-DS)
5.1
Introduction to the Comfort- DS / Comfort Plus-
DS Control
Control of your HygroMatik steam humidifier is performed by sophisti-
cated microprocessors. These microprocessors intelligently and self-
adaptively select the most economical mode of operation for the steam
humidifier appropriate to the existing water quality. Optimized start-up
procedures provide rapid steam production and quick responses to all
control operations. The HygroMatik control regulates the complete
blow-down procedure and the operation of the water inlet solenoid
valve. For electrode steam humidifiers, it self monitors to control the
conductivity of the cylinder water.
The HygroMatik microprocessor control Type DS is a particularly user-
friendly control, delivering the user all important information.
The Comfort- DS /Comfort Plus- DS Control features:
•
a lighted alphanumeric LC-Display
•
an (optional) RS232 or RS485 interface as the basis for the
Modbus RTU protocol
•
optimal adaptivity of the steam generator due to wide parameter
adjustability
•
5 LEDs on the display panel give an instant overview of the most
important operations
•
Stand-by blow-down to prevent standing cylinder water. After a
long period with no steam production, the cylinder is completely
drained
•
4 connections for control of the steam bath supply and exhaust
fans, essence delivery system and light
•
Remote control (optional)
•
selection of steam bath operations with or without status indica-
tor
•
variable temperature control depending on operational mode
The performance options and available settings for your HygroMatik
Control Type DS-Comfort and DS-Comfort Plus are explained below in
detail.
Both the HygroMatik Comfort Control and the Comfort Plus consist of a
main PCB and a display unit with back-lighted display, as well as an
LED with icons and keys for direct communication with the control.
