EN-GB - 3
HYENA E-BIKE SYSTEMS
⚠
WARNINGS,
continued
.
• Do not place the e-bike or any assist system component (like the charger) near hot or
flammable objects or materials.
• The assist system parts are not intended to be used at ambient temperatures lower than
-10°C (14°F) or over temperatures of 45°C (113°F).
• Use only genuine Hyena replacement parts. If you use anything other than genuine Hyena
replacement parts, you may compromise the safety, performance or warranty of your e-bike.
• Do not modify your assist system to increase the power or maximum speed of your assist
system.
1.3.
Riding safety
• Make sure you are familiar with your new e-bike before riding it on roads with multiple
vehicle lanes and pedestrian footpaths.
•
Do not start on the fastest setting right away. Start on the low assist setting for your first
few rides.
• Do not focus on the console while riding. A distracted rider increases the risk of being
involved in an accident.
•
Riding with the assist system turned off is like riding a normal, non-electric powered bicycle.
• The assist system is designed to provide riding support up to the speed limits in compliance
with local regulations (e.g. 25 km/h in the EU region and Australia, 32 km/h in New Zealand
and 20 mph in the USA/Canada region). Do not modify your assist system or fit any other
equipment to increase the power or maximum speed of your assist system, this will render
the bike illegal and void the warranty.
⚠
WARNINGS
• When the assist system is switched on and an assist level is selected, the riding support
is activated as soon as you start pedalling. You should be seated on the e-bike and
engage at least one brake before starting to pedal.
• With the assist system switched on, do not put one foot on a pedal and throw the other
leg over the bicycle, as the e-bike could accelerate unexpectedly.
Failure to follow this warning may result in serious injury or death.
