With the
MultiSystem 5070,
you can program the electronically controlled load valve
HySense QL 326
and
operate it in various operating modes.
Activating the CAN-BUS
Start the
MultiSystem 5070
and activate the
CAN #1 bus
in the menu "Connections". Set the baud rate
to 125kBit/s. With F5 (OK) you leave the menu.
1
Press
to open the menu.
2
Use
to highlight
Setting
and press
.
3
Use
to highlight
Device
and press
.
4
Use
to highlight
Connections
and press
.
5
Use
to highlight
CAN #1
and press
.
6
Use
to highlight
Interface
and press
t
ACTIVE
.
7
Use
to highlight
Power Supply
and use
and to switch to
OFF
.
8
Use
to highlight
Bus termination
and press and switch to
YES
.
9
Use
to highlight
Baudrate
and press and switch to
125kBit/s
.
10
The
Start CANopen
entry is not relevant for the operation of the load valve
.
11
Exit folder using F5 .
Starting the application Load valve
Select the menus "Extras", "Special applications" always open the menus by selecting
. Select the
menu "Load valve".
1
Press
to open the menu.
2
Use
to highlight
Extras
and press
.
3
Use
to highlight
Special Applications
and
press .
4
Use
to highlight
Load valve
and
press .
You are now in the "Load valve" application.
5
OPERATION WITH MS5070
