Operate the load line
The following requirements must be met before you can operate a load valve with the measuring instrument:
•
The load valve is connected to the measuring instrument and ready for operation.
•
Active communication between the measuring instrument and the load valve.
A
heartbeat
is displayed.
•
The load distance is programmed.
Activate load valve
1
Press
to open the menu.
2
Use
to highlight
Special Applications
and press
.
3
Use
to highlight
QL-326
(device) and press
.
Connected
is displayed next to the
QL-326
entry.
4
Press
repeatedly until the measurement display appears
The function bar at the bottom of the measurement display, has a double assignment - this can be recognized by
two arrows on the right-hand side of the screen.
Press
to switch between the assignments:
In the
operating mode ramp and sine
the commands
START
and
STOP
appear on the function bar
In the
operating mode manual
, the commands
START
and
STOP
and a status display appear on the function
bar