SAFETY
HySense
®
CX 197
6
ENG
•
When ventilating, note that skin contact with hot oil can cause burns.
Adjust the oil pressure so that only a little oil escapes.
•
The service measuring kit should be fastened securely in a suitable
location so that falling or damage to the sensors is avoided.
•
Handle the service measuring kit and measurement technology
properly.
•
If hydraulic fluid escapes or is spilled, avoid contamination of the
environment and the ground water. Use oil binders to bind escaped oil.
•
During installation, pay attention to cleanliness in order to prevent
foreign bodies such as metal chips or fibers from cleaning cloths from
getting into the hydraulic lines and causing wear and malfunctions in
the product.
•
Before start-up, check whether all hydraulic and mechanical
connections are connected and tight, and ensure that all gaskets and
seals of the plug connections are inserted correctly and undamaged.
•
Do not use hemp as a sealant.
1.3 Information about the handling of sensors and cables
•
Protect the sensors from exceeding the allowed power range, mechanical
overload and incorrect pin assignment.
•
Never expose the service measuring kit to excessive heat or humidity and
observe the technical data.
•
Never submerge the sensors in water or other liquids. Never let liquids
penetrate the instrument.
•
Never open the instruments.
•
Avoid strong magnetic fields. Keep the sensors away from electric motors
or other instruments that generate electromagnetic fields. Strong magnetic
fields can cause malfunctions and influence measurement values.
•
Prevent the formation of condensation. If condensation has formed, let the
instrument acclimate before you switch it on. Otherwise it can be damaged.